Home :: Insulation Supplies :: Springvale Floorshield EPS70 sheet 25mm 2400x1200mm

Springvale Floorshield EPS70 sheet 25mm 2400x1200mm

Springvale Floorshield EPS70 sheet 25mm 2400x1200mm

Insulation Place Says

Floorshield is a very flexible product with many different uses. It is designed for use in; solid concrete floors above or below the ground bearing slab, about a suspended beam and block floor, within a suspended timbre floor and below under floor heating systems.

Customer Says

“I couldn’t believe how easy to handle and light the Floorshield product was, and it was so simple to fit! I’m now looking forward to see how much I’ve saved on my bills.”

Manufacturer Says

Floorshield is a proven solution to ground insulation. It provides the customer with a reassurance as it is an efficient and cost effective solution to insulation a wide variety of solid and suspended floor constructions including domestic, commercial and industrial ground floor applications.

Springvale Floorshield EPS70 sheet 25mm 2400x1200mm 

Proven solutions to give you a nice warm feeling inside

Springvale Floorshield has been providing the effective, efficient and cost-effective solution to insulating a wide variety of solid and suspended floor constructions for decades, making substantial contributions to energy efficiency.

An expanded polystyrene rigid insulation board, it is available in original white EPS
Floorshield products are light and easy-to-handle and can be fitted simply in domestic, commercial and industrial ground floor applications. Floorshield is suitable for use in solid concrete floors above or below the ground bearing slab; above a suspended beam and block floor; within a suspended timber floor and below under floor heating systems.

The inherent insulation and compressive strength properties of this versatile material make it the most cost-effective loadbearing insulant for floor construction, with a compressive strength at 1% compression of 21 kPa. Springvale Floorshield products are the ideal solution for domestic applications.

Providing excellent thermal insulation properties Floorshield reduce heat loss, conserve energy and can be used in conjunction with other products in Springvale’s Shield range to assist compliance with the Code for Sustainable Homes.

Manufactured in a range of thicknesses, enabling appropriate U-values to be achieved, they are approved by the British Board of Agrement and are available through insulation distributors and builders merchants throughout the UK.

Compressive Strength - EPS 70

Certification
Floorshield has been awarded BBA certificate No: 91/2568. The products are manufactured to the requirements of BS EN 13163:2001 and under an ISO 9001:2000 approved quality management system.

Sustainability
The environmental integrity of Springvale Floorshield products is exceptional:
• Zero ODP (Ozone Depletion Potential)
• Zero GWP (Global Warming Potential)
• BRE Ecopoints rating of 0.043
• CFC, HFC and HCFC free
• Contains recycled content
• Boards are 100% recyclable

Durability
The thermal insulation properties of Springvale Floorshield products will remain effective for the life of the building. The cells in the board contain air, ensuring consistent performance throughout the lifetime of the products.
They are dimensionally stable products, which are resistant to attack from bacteria, moulds and fungi, and will not provide nutrient value for insects or vermin. They are also non-toxic and non-irritant.

Moisture Resistance
Floorshield can be laid in damp conditions without compromising their performance or longevity.

Fire Performance
A finished concrete floor containing Springvale Floorshield products can be expected to be classified as Euroclass B.

Building Regulation Requirements
The Guideline U-value for a ground floor in accordance with Approved Document Part L is 0.22 W/m2K. Pre and Post construction SAP calculations are required to ensure compliance. This is a service that Springvale’s Technical Department will be delighted to carry out on your behalf.

Specification Clause
Floorshield products should be described in specifications as: The floor insulation shall be Floorshield/Platinum Floorshield, manufactured to BS EN 13163 by Springvale EPS Ltd. BBA approved expanded polystyrene boards (certificate no.91/2568) to be installed according to Springvale's instructions. Refer to NBS Plus, clause E20 200 (Proprietary Under Slab Insulation) for further information.

EPS 70 grade is for general and mainly domestic applications.

Site Work

Handling and Storage
Packs of Floorshield and Platinum Floorshield are delivered to site wrapped in polythene. Store panels in their original packaging, under cover and protected from direct sunlight. Keep boards above ground level and out of contact with solvents and materials containing volatile organic compounds such as coal tar, pitch or creosote. Do not expose to naked flame or other ignition sources during storage or installation.

Services
Do not use Floorshield or Platinum Floorshield boards in direct contact with PVC – sheathed electrical cables or hot water pipes. Electrical cables should be enclosed in suitable conduit.

Installation Guide:

Floorshield Brochure:


Floorshield information pack:



Product Code INPS8410  
Shipping Weight 4000.00 kg
 
Price (ex VAT): £3.97
Price (Inc VAT) : £4.76
Quantity Price*
5-14 Items £3.57
15+ Items £3.48
*Note:
Quantity   
: *
: *
: *
 
Collated drywall screws - 50mm box 1000 (strips of 50)
Knauf Earthwool flexible slab 100mm (pack 16)
Simpson Strong Tie - Masonry Supported Joist Hanger (JHM) - 75x200mm
Collated drywall screws - 50mm box 1000 (strips of 50) Knauf Earthwool flexible slab 100mm (pack 16) Simpson Strong Tie - Masonry Supported Joist Hanger (JHM) - 75x200mm
£10.82
£242.40
£3.83
 
Simpson Strong Tie - Reinforced Angle Bracket ( E ) - 90x150x65mm
Spax - Countersunk Screw - 4x60mm - Box 100
Spax - Countersunk Screw Yellow Pozi - 3x25mm - Box 200
Simpson Strong Tie - Reinforced Angle Bracket ( E ) - 90x150x65mm Spax - Countersunk Screw - 4x60mm - Box 100 Spax - Countersunk Screw Yellow Pozi - 3x25mm - Box 200
£3.47
£5.17
£2.16
 
Spax - PZ1 25mm Bit Pack -  5 Pack - Standard finish
Spax - Zinc Washer Head - 6x120mm
Velux Centre-Pivot Roof Window GGL 3050 MK06 - 78x118cm
Spax - PZ1 25mm Bit Pack - 5 Pack - Standard finish Spax - Zinc Washer Head - 6x120mm Velux Centre-Pivot Roof Window GGL 3050 MK06 - 78x118cm
£3.28
£0.32
£219.20